Sunlight and nanostructured electrodes are the two ingredients used by INRS Professor My Ali El Khakani and a team from ICPEES in France to produce green hydrogen.
The research team of Professor My Ali El Khakani from the Institut national de la recherche scientifique (INRS) has joined forces with French researchers from the Institute of Chemistry and Processes for Energy, Environment and Health (ICPEES),a CNRS-University of Strasbourg joint research lab, to pave the way towards the production of green hydrogen. This international team has developed new sunlight-photosensitive-nanostructured electrodes. The results of their research were published in the journal of Solar Energy Materials and Solar Cells.
Hydrogen is being considered by several countries of the Organisation for Economic Co-operation and Development (OECD) as a key player in the transition towards decarbonized industries and sectors. According to the INRS Professor My Ali El Khakani, Quebec could strategically position itself in this energy sector of the future. “Thanks to high-performance nanomaterials, we can improve the efficiency of water dissociation to produce hydrogen. This “clean” fuel is becoming increasingly important for the decarbonisation of the heavy-duty trucking and public transportation. For example, buses using hydrogen as a fuel are already in operation in several European countries and in China. These buses emit water instead of greenhouse gases,” added the physicist and nanomaterials specialist.
Splitting water molecules into oxygen and hydrogen has long been done by electrolysis. However, industrial electrolyzers are very energy-intensive and require large investments. The INRS and ICPEES researchers were rather inspired by a natural mechanism: photosynthesis. Indeed, they have developed specially engineered and structured electrodes that split water molecules under the sun’s light. This is a process known as photocatalysis.
For maximum use of solar energy, the research teams have selected a very abundant and chemically stable material: titanium dioxide (TiO2). TiO2 is a semiconductor known for being photosensitive to UV-light, which accounts only for 5% of the solar irradiance. Researchers have used their expertise in the field to first change the atomic composition of TiO2 and extend its photosensitivity to visible light. They were able to produce electrodes that can absorb up to 50% of the light emitted by the sun. A significant gain right from the start!
The researchers have then proceeded with the nanostructuration of the electrode to form a network of TiO2 nanotubes (NT-TiO2), that resembles a beehive-like structure. This method multiplied the effective surface area of the electrode by a factor of 100,000 or more. “Nanostructuring maximizes the ratio between surface and volume of a material. For example, TiO2 nanostructures can offer a surface area of up to 50 m2 per gram. That’s the surface area of a mid-size flat!”, Professor El Khakani enthusiastically pointed out.
The final step of the electrode elaboration is their “nanodecoration”. This process consists of depositing catalyst nanoparticles on the otherwise infinite network of TiO2 nanotubes to increase their efficiency of hydrogen production. To achieve this nanodecoration step, the researchers used the laser ablation deposition technique, a field where Professor El Khakani has developed a unique expertise over the last 25+ years. The challenge was not only to control the size, dispersion and anchorage of catalyst nanoparticles on the TiO2 nanotube matrix, but also to find alternatives to the costly iridium and platinum classical catalysts.
This research, which was the subject of Thomas Favet’s doctoral thesis (in the framework of a dual diplomation program between INRS and University of Strasbourg), identified cobalt (CoO) and nickel (NiO) oxides, two materials that are quite available in Quebec’s underground, as effective co-catalysts for splitting water molecules.
A comparison of the two materials showed that CoO nanoparticles (with a size of 20 nm or less) enabled a tenfold increase the photocatalytic efficiency of these new nanodecorated electrodes under visible light compared to bare nanotubes. This remarkable enhancement is due to the optoelectronic properties of the CoO nanoparticles, that favor a better photocharges (electrical charges produced by light) conveyance with the underlying TiO2 electrode.
The article “Comparative study of the photocatalytic effects of pulsed laser deposited CoO and NiO nanoparticles onto TiO2 nanotubes for the photoelectrochemical water splitting”, by Thomas Favet, Thomas Cottineau, Valérie Keller and My Ali El Khakani, was published in the November 2020 issue of the journal of Solar Energy Materials and Solar Cells. Researchers received financial support from the Natural Sciences and Engineering Research Council of Canada (NSERC) and the Fonds de recherche du Québec – Nature et technologies (FRQNT). The project was also partially funded, in France, by the Agence nationale de la recherche (ANR). Doctoral student Thomas Favet also benefited from a joint scholarship from the Alsace region and INRS.
March 11, 2021A promising new way to convert solar energy to fuel
February 22, 2021Silver and gold nanowires open the way to better electrochromic devices