Professeur INRS

Expertises

Électrochimie , Nouveaux matériaux d'électrodes utilisables dans des systèmes d'intérêt industriel

Téléphone
514 228-6985

Télécopieur
450 929-8102

Courriel
lionel.roue@emt.inrs.ca

Centre Énergie Matériaux Télécommunications

1650, boulevard Lionel-Boulet
Varennes (Québec)  J3X 1S2
CANADA

Voir le centre

Intérêts de recherche

Le professeur Lionel Roué est électrochimiste de formation. Au cours des dernières années, il a développé une programmation scientifique centrée sur l’étude de nouveaux matériaux d’électrode (plus particulièrement les matériaux nanostructurés préparés par broyage mécanique).

Ces projets traitent des aspects fondamentaux de l’électrochimie propres à ces matériaux et abordent également des volets plus pratiques liés à l’utilisation de ces matériaux dans diverses applications électrochimiques (batteries Li-S et Li-ion, electrolyse de l’aluminium, traitement d’effluents…).

Son équipe

Mohamed Fatahine

Doctorat en sciences de l’énergie et des matériaux

Lucas Huet

Doctorat en cotutelle de thèse

Sylvain Jucken

Doctorat en sciences de l’énergie et des matériaux

Quentin Lemarié

Doctorat en cotutelle de thèse

Saeed Mohammadkhani

Doctorat en sciences de l’énergie et des matériaux

Victor Vanpeen

Stage postdoctoral

Étienne Yvenou

Stage postdoctoral

Fonctions et formation universitaire

  • DEA, chimie fine, Université de Bretagne Occidentale, Brest, France
  • Doctorat, chimie analytique, Université de Paris VI – P. et M. Curie, France
  • Professeur au Centre Énergie Matériaux Télécommunications de l’INRS depuis 1998

Projets de recherche en cours

  • Développement de méthodes de caractérisation in-situ (émission acoustique, dilatométrie, tomographie RX…) appliquées à l’étude de matériaux de batteries Li-ion et Li-S.
  • Développement d’électrodes négatives à base de Si pour batteries Li-ion.
  • Conception d’anodes inertes et de cathodes mouillables pour la production d’aluminium.

Partenaires universitaires

  • D. Guay, INRS
  • C. Moreau et al., Université Concordia
  • A. Boucherif et al., Université de Sherbrooke
  • B. Lestriez et al., Institut des Matéiaux de Nantes
  • H. Idrissi et E. Maire, INSA-Lyon
  • P-X. Thivel et F. Alloin, LEPMI-Grenoble

Partenaires industriels

  • SAFT
  • Renault
  • Nouveau Monde Graphite
  • HPQ Silicon
  • Dekko Technologies
  • Kingston Process Metallurgy
  • Métal 7

Activités scientifiques

Membre du Centre québécois pour les matériaux fonctionnels (CQMF) – pôle Énergie  constitué de 60 professeurs de 9 institutions, supporté par une subvention FQRNT-Regroupement stratégique.

Publications

D. Mazouzi,R. Grissa,M. Paris,Z. Karkar,L. Huet,D. Guyomard,L. Roué,T. Devic,B. Lestriez.
CMC-citric acid-Cu(II) cross-linked binder approach to improve the electrochemicalperformance of Si-based electrodes, Electrochim. Acta 304 (2019) 495-504.

V. Vanpeene, J. Villanova, A. King, B. Lestriez, E. Maire,L. Roué
Dynamics of the morphological degradation of Si-based anodes for Li-ion batteries characterized by in-situ synchrotron X-ray tomography. Adv. Energy Mater. (2019) 1803947.

T. Devic, B. Lestriez, L. Roué
Silicon electrodes for Li-ion batteries. Addressing the challenges through coordination chemistry. ACS Energy Lett. 4 (2019) 550-557.

Q. Lemarie, F. Alloin, P.X. Thivel, H. Idrissi, L. Roué
Study of sulfur-based electrodes by operando acoustic emission, Electrochim. Acta 299 (2019) 415-422.

S. Jucken, E. Schaal, B. Tougas, B. Davis, D. Guay, L. Roué
Impact of a post-casting homogenization treatment on the high-temperature oxidation resistance of a Cu-Ni-Fe alloy, Corr. Sci. 147 (2019) 321-329.

V. Vanpeene, A. King, E. Maire, L. Roué
In situ characterization of Si-based anodes by coupling synchrotron X-ray tomography and diffraction. Nano Energy 56 (2019) 799-812.

N. Sacre, M. Duca, S. Garbarino, R. Imbeault,  A. Wang, Y. Hadj, J. Galipaud, G. Hufnagel, A. Ruediger, L. Roué, D. Guay
Tuning Pt-Ir interactions for NH3 electrocatalysis. ACS Catalysis 8 (2018) 2508−2518.

C. Reale Hernandez, A. Etiemble, D. Mazouzi, Z. Karkar, E. Maire, D. Guyomard, B. Lestriez, L. Roué
A Facile and Very Effective Method to Enhance the Mechanical Strength and the Cyclability of Si-Based Electrodes for Li-Ion Batteries. Advanced Energy Materials 8 (2018) 1701787.

Z. Karkar, D. Guyomard,L. Roué, B. Lestriez
A comparative study on polyacrylic acid (PAA) and carboxymethyl cellulose (CMC) binders for Si-based electrodes, Electrochimica Acta 258 (2017) 453-466.

Z. Karkar,T. Jaouhari, D. Mazouzi, D. Guyomard,B. Lestriez, L. Roué
How silicon electrodes can be calendered without altering their mechanical strength and cycle life, J. Power Sources 371 (2017) 136-147.

N. Nzone-Fomena, S. Garbarino, E. Bertin, A. Korinek, G. A. Botton, L. Roué, D. Guay
Pt nanostructures with different Rh surface entities: impact on NH3 electro-oxidation,J. Catalysis 354 (2017) 270-277.

N. Sacré, G. Hufnagel, J. Galipaud, E. Bertin, H. Ali El Sayed, M. Duca, L. Roué, A. Ruediger, S. Garbarino, D. Guay
Pt thin films with nanometer-sized terraces of (100) orientation.Journal of Physical Chemistry, 121 (2017) 12188-12198.

V. Vanpeeene, A. Etiemble, A. Bonnin, E. Maire, L. Roué
In-situ X-ray tomographic study of the morphological changes of a Si/C paper anode for Li-ion batteries, J. Power Sources 350 (2017) 18-27.

N. Nzone-Fomena, S. Garbarino, G. Botton, L. Roué, D. Guay
Nanostructured Pt surfaces with Ir submonolayers for enhancedNH3 electro-oxidation. ChemElectroChem, 4 (2017) 1327-1333.

J. Tosques, B. Honrado Guerreiro, M. H. Martin, L. Roué, D. Guay
Hydrogen solubility of bcc PdCu and PdCuAg alloys prepared by mechanical alloying. J. Alloys Compds., 698 (2017) 725-730.

A. Tranchot, P-X. Thivel, H. Idrissi, L. Roué
Influence of the Si particle size on the mechanical stability of Si-based electrodes evaluated by in-operando dilatometry and acoustic emission
J. Power Sources 330 (2016) 253-260.

Z. Karkar, D. Mazouzi, C. Reale Hernandez, D. Guyomard, L. Roué, B. Lestriez
Threshold-like dependence of silicon-based electrode performance on active mass loading and nature of carbon conductive additive
Electrochim. Acta 215 (2016) 276-288.

A. Etiemble, A. Tranchot, T. Douillard, H. Idrissi, E. Maire, L. Roué
Evolution of the 3D Microstructure of a Si-Based Electrode for Li-Ion Batteries Investigated by FIB/SEM Tomography
J. Electrochem. Soc. 163 (2016) A1550-A1559.

A. Tranchot, P-X. Thivel, H. Idrissi, L. Roué
Impact of the slurry pH on the expansion/contraction behavior of silicon/carbon/carboxymethylcellulose electrodes for Li-ion batteries
J. Electrochem. Soc. 163 (2016) A1020-A1026.

B. Honrado Guerreiro, M. H. Martin, L. Roué, D. Guay
Hydrogen permeability of PdCuAu membranes prepared from mechanically-alloyed powders
J. Memb. Sci. 509 (2016) 68–82.

B. Honrado Guerreiro, M. H. Martin, L. Roué, D. Guay
Hydrogen Solubility of Magnetron Co-Sputtered FCC and BCC PdCuAu Thin Films
J. Phys. Chem. C 120 (2016) 5297–5307.

C. Roy, J. Deschamps, M. Martin, E. Bertin, D. Reyter, S. Garbarino, L. Roué, D. Guay
Identification of Cu surface active sites for a complete nitrate-to-nitrite conversion species with nanostructures catalysts
Applied Catalysis B: Environmental, 87 (2016) 399-407.

D. Finkelstein, R. Imbeault, S. Garbarino, L. Roué, D. Guay
Trends in Catalysis and Catalyst Cost Effectiveness for N2H4 Fuel Cells and Sensors: A Rotating Disk Electrode (RDE) Study
J. Phys. Chem. C, 120 (2016) 4717–4738.

J. Galipaud, M. Martin, L. Roué, D. Guay
Pulsed Laser Deposition of PdCuAu Alloy Membranes for Hydrogen Absorption Study
J. Phys. Chem. C 119 (2015) 26451−26458.

A. Etiemble, H. Idrissi, P. Bernard, L. Roué
New insights into the pulverization of LaNi5-based alloys with different Co contents from electrochemical acoustic emission measurements
Electrochimica Acta 186 (2015) 112-116.

C. Real Hernandez, Z. Karkar, D. Guyomard, B. Lestriez, L. Roué
A film maturation process for improving the cycle life of Si-based anodes for Li-ion batteries
Electrochem. Comm. 61 (2015) 102-105

E. Gavrilova, G. Goupil, B. Davis, D. Guay, L. Roué
On the key role of the Cu content on the oxidation behavior of Cu-Ni-Fe anodes for Al electrolysis
Corrosion Science 101 (2015) 105-113.

J. Galipaud, C. Roy, M. Martin, S. Garbarino, L. Roué, D. Guay
Electrooxidation of ammonia at tuned (100)Pt surfaces using epitaxial thin films
ChemElectroChem 2 (2015) 1187–1198.

D. Mazouzi, Z. Karkar, C. Reale Hernandez, P. Jimenez Manero, D. Guyomard, L. Roué, B. Lestriez
Critical roles of binders and formulation at multiscales of silicon-based composite electrodes
J. Power Sources 280 (2015) 533-549.

A. Tranchot, A. Etiemble, P-X. Thivel, H. Idrissi, L. Roué
In-situ acoustic emission study of Si-based electrodes for Li-ion batteries
J. Power Sources 279 (2015) 259-266.

G. Goupil, S. Jucken, D. Poirier, J.G. Legoux, E. Irissou, B. Davis, D. Guay, L. Roué
Cold-sprayed Cu-Ni-Fe anode for aluminum electrolysis
Corros. Sci. 90 (2015) 259-265.

J. Tosques, M. H. Martin, L. Roué, D. Guay
Hydrogen solubility in PdCuAg ternary alloy thin films prepared by electrodeposition
Inter. J. Hydrogen Energy 39 (2014) 15810-15818.

A. Etiemble, H. Idrissi, L. Roué
In-situ monitoring of the volume change and cracking of a MgTi hydride electrode
Inter. J. Hydrogen Energy 39 (2014) 10169-10174.

A. Etiemble, J. Adrien, E. Maire, H. Idrissi, D. Reyter, L. Roué
3D morphological analysis of Cu foams as current collectors for Li-ion batteries by means of X-ray tomography
Mater. Science Eng. B 187 (2014) 1-8.

D. Mazouzi, D. Reyter, M. Gauthier, P. Moreau, D. Guyomard, L. Roué, B. Lestriez
Very high surface capacity observed with Si negative electrodes embedded in copper foam as 3D current collector
Adv. Energy Mater (2014) 1301718

R. Imbeault, D. Finkelstein, D. Reyter, S. Garbarino, L. Roué, D. Guay
Kinetically stable PtxIr100-x alloy thin films prepared by pulsed laser deposition: Oxidation of NH3 and poisoning resistance
Electrochimica Acta 142 (2014) 289-298.

B. Honrado Guerreiro, M. H. Martin, L. Roué, D. Guay
Hydrogen solubility in PdCuAu alloy  thin films prepared by electrodeposition
Inter. J. Hydrogen Energy, 39 (2014) 3487-3497.

M. Gauthier, D. Reyter, D. Mazouzi, P. Moreau, D. Guyomard, B. Lestriez, L. Roué
From Si wafers to cheap and efficient Si electrodes for Li-ion batteries
J. Power Sources 256 (2014) 32-36.

G. Goupil, S. Helle, D. Guay, L. Roué
Anodic behavior of Cu-Ni-Fe and Cu-Ni-Fe-O electrodes for aluminum electrolysis
Electrochim. Acta, 112 (2013) 176-182.

D. Reyter, S. Rousselot, M. Gauthier, D. Mazouzi, B. Lestriez, D. Guyomard, L. Roué
Electrochemically roughened Cu current collector for Si-based electrodes in Li-ion batteries
J. Power Sources 239 (2013) 308-314.

A. Etiemble, W. Guo, S. Rousselot, H. Idrissi, L. Roué
Effect of Pd addition on the performance of Mg-Ni-Ti-Al-based metal hydride electrode for Ni-MH batteries
Inter. J. Hydrogen Energy 38 (2013) 7169-77.

G. Goupil, G. Bonnefont, H. Idrissi, L. Roué
Consolidation of mechanically alloyed Cu-Ni-Fe-O material by spark plasma sintering and evaluation as inert anode for aluminum electrolysis
J. Alloys Compd. 580 (2013) 256-261.

S. Helle, B. Davis, D. Guay, L. Roué
Ball-milled (Cu-Ni-Fe + Fe2O3) composite as inert anode for aluminum electrolysis
J. Electrochem. Soc. 160 (6) (2013) E55-E59.

J. Galipaud, M. H. Martin, L. Roué, D, Guay
Measurement of hydrogen solubility in PdxCu100-x thin films prepared by pulsed laser deposition: an electrochemical in situ X-ray diffraction analysis
J. Phys. Chem. C 117 (6) (2013) 2688–2698.

S. Le Vot, L. Roué, D. Bélanger
Study of the electrochemical oxidation of ammonia on platinum in alkaline solution: effect of electrodeposition potential on the activity of platinum
J. Electroanal. Chem. 691(2013) 18-27.

M. Gauthier, D. Mazouzi, D. Reyter, B. Lestriez, P. Moreau, B. Lestriez, D. Guyomard, L. Roué
A low-cost and high-performance Si-based electrode for Li-ion batteries
Energy Environ. Sci. 6 (2013) 2145–2155.

M. H. Martin, J. Galipaud, A. Tranchot, L. Roué, D. Guay
Measurements of hydrogen solubility in CuxPd100-x thin films
Electrochim. Acta, 90 (2013) 615-622.

M. Gauthier, J. Danet, B. Lestriez, L. Roué, D. Guyomard, P. Moreau
Nanoscale composition of Si negative electrodes during first delithiation
J. Power Sources, 227 (2013) 237-242.

A. Etiemble, H. Idrissi, L. Roué
Effect of Ti and Al on the pulverization resistance of MgNi-based electrodes evaluated by acoustic emission
Int. J. Hydrogen Energy 38 (2013) 1136-44.

S. Le Vot, L. Roué, D. Bélanger
Synthesis of Pt-Ir catalysts by coelectrodeposition: application to ammonia electrooxidation in alkaline media
J. Power Sources 223 (2013) 221-231.

D. Mazouzi, N. Delpuech, Y. Oumellal, M. Gauthier, M. Cerbelaud, J. Gaubicher, N. Dupré, P. Moreau, D. Guyomard, L. Roué, B. Lestriez
New insights into the silicon-based electrode’s irreversibility along cycle life through simple gravimetric method
J. Power Sources 220 (2012) 180.

L. Meddar, B. Magnien, M. Clisson, L. Roue, D. Guay
Effect of Al addition on the microstructure and low temperature oxidation behavior of pre-formed MoSi2
J. Mater. Science 47 (2012) 6792-6800.

R. Imbeault, D. Reyter, S. Garbarino, L. Roué, D. Guay
Metastable AuxRh100-x thin films prepared  by pulsed laser deposition for the electrooxidation of methanol
J. Phys. Chem. C 116 (2012) 5262−5269.

S. Le Vot, D. Reyter, L. Roué, D. Bélanger
Electrochemical oxidation of NH3 on platinum electrodeposited onto graphite carbon
J. Electrochem. Soc. 159 (2012) F1-F6.

A. Etiemble, S. Meille, H. Idrissi, L. Roué
In-situ investigation of the volume change and pulverization of hydride materials for Ni-MH batteries by concomitant generated force and acoustic emission measurements
J. Power Sources 205 (2012) 500-505.

S. Helle, M. Tresse, D. Guay, L. Roué
Mechanically alloyed Cu-Ni-Fe-O based materials as oxygen-evolving anodes for aluminum electrolysis
J. Electrochem. Soc. 159 (2012) E1-E7.

S. Rousselot, M. Gauthier, D. Mazouzi, B. Lestriez, D. Guyomard, L. Roué
Synthesis of boron-doped Si particles by ball milling: application in Li-ion batteries
J. Power Sources, 202 (2012) 262-68.

S. Le Vot, L. Roué, D. Bélanger
Electrodeposition of iridium onto glassy carbon and platinum electrodes
Electrochim. Acta, 59 (2012) 49-56.

S. Helle, B. Brodu, B. Davis, D. Guay, L. Roué
Influence of the iron content in Cu-Ni based inert anodes on their corrosion resistance for aluminium electrolysis
Corrosion Science 53 (2011) 3248–3253.

M. Allemand, M.H. Martin, D. Reyter, L. Roué, D. Guay, C. Andrei, G. Botton
Synthesis of Cu-Pd alloy thin films by co-electrodeposition
Electrochim. Acta 56 (2011) 7397-7403.

D. Reyter, D. Bélanger, L. Roué
Optimization of the cathode composition for nitrate removal by a paired electrolysis process
J. Hazardous Materials 192 (2011) 507-513.

S. Helle, B. Brodu, B. Davis, D. Guay, L. Roué
Influence of the iron content in Cu-Ni based inert anodes on their corrosion resistance for aluminium electrolysis
Corrosion Science, in press.

M. Allemand, M.H. Martin, D. Reyter, L. Roué, D. Guay, C. Andrei, G. Botton
Synthesis of Cu-Pd alloy thin films by co-electrodeposition
Electrochimica Acta, in press.

D. Reyter, D. Bélanger, L. Roué
Optimization of the cathode composition for nitrate removal by a paired electrolysis process
J. Hazardous Materials, in press.

A. Etiemble, H. Idrissi, L. Roué
On the decrepitation mechanism of MgNi and LaNi5-based electrodes studied by acoustic emission
J. Power Sources, 196 (2011) 5168-5173.

S. Rousselot, D. Guay, L. Roué
Comparative study on the structure and electrochemical H-storage properties of MgTi, Mg0.5Ni0.5Ti and MgTi0.5Ni0.5 alloys prepared by high energy ball milling
J. Power Sources, 196 (2011) 1561-1568.

B. Lestriez, D. Guyomard, D. Mazouzi, L. Roué
Method for preparing an electrode composition
Brevet WO 2010/086558.

S. Helle, B. Davis, D. Guay, L. Roué
Electrolytic production of aluminum using mechanically alloyed Cu-Al-Ni-Fe based materials as inert anodes
J. Electrochem. Soc. 157 (2010) E173-E-179.

S. Helle, M. Pedron, B. Assouli, B. Davis, D. Guay, L. Roué
Structure and high-temperature oxidation behavior of Cu-Ni-Fe based alloys prepared by high‑energy ball milling for application as inert anodes for aluminum electrolysis.
Corrosion Science, 52 (2010) 3348-55.

S. Rousselot, D. Guay, L. Roué
Synthesis of fcc Mg-Ti-H alloys by high energy ball milling: structure and electrochemical hydrogen storage properties
J. Power Sources 195 (2010) 4370-4374.

D. Reyter, D. Bélanger, L. Roué
Nitrate removal by a paired electrolysis on copper and Ti/IrO2 coupled electrodes – Influence of the anode / cathode surface area ratio
Water Research44 (2010) 1918-1926.

S. Bouhtiyya, L. Roué
Structue and electrochemical hydrogen storage properties of Pd/MgxAl1-x/Pd thin films prepared by pulsed laser deposition
J. Mater. Science, 45(2010) 946-952.

S. Rousselot, A. Gazeau, D. Guay, L. Roué
Influence of Pd on the structure and electrochemical hydrogen storage properties of Mg50Ti50 alloy prepared by ball milling
Electrochim. Acta, 55 (2010) 611-619.

M. Clisson, J. Gaudet, L. Roué, D. Guay
Structure and thermal oxidation properties of RuAl and Ru-Al-Ti alloys prepared by mechanical alloying
TMS 2010 Proceedings, Volume 3, General Paper Selections, 455-461.

S. Helle, B. Brodu, B. Davis, D. Guay, L. Roué
Ball-milled Cu-Al based material as inert anode for aluminum production in KF-AlF3 low-temperature electrolyte
Light Metals (2010) 935-939.

Rousselot S., Bichat M-P., Guay D., Roué L.
Structural and Electrochemical Hydriding Characteristics of Mg-Ti Based Alloys Prepared by Ball Milling
J. Electrochem. Soc., 156 (2009) A967-973.

Mazouzi D., Roué L., Guyomard D., Lestriez B.
Silicon composite electrode with high capacity and long cycle life
Electrochem. Solid State Let., 12 (2009) 215-218.

Bouhtiyya S., Roué L.
Pd/Mg/Pd thin films prepared by pulsed laser deposition under different helium pressures: structure and electrochemical properties
Inter. J. Hydrogen Energy, 34 (2009) 5778-5784.

Bonneau M. E., Blouin M., Chabanier C., Roué L., Schulz R., Guay D.
Hydrogen absorption in nanocrystalline cubic Ti-based compounds
J. Phys. Chem C., 113 (2009) 1196-1203.

Reyter D., Belanger D., Roué L.
Elaboration of Cu-Pd films by co-electrodeposition. Application to nitrate electroreduction
J. Phys. Chem C, 113 (2009) 290-297

Rousselot S., Bichat M-P., Guay D., Roué L.
Structure and electrochemical hydrogen storage properties of Mg-Ti based materials prepared by ballmilling
ECS Transactions,16 (42) (2009) 91-100

Assouli B., Pedron M., Helle S., Carrere A., Guay D., Roué L.
Mechanically alloyed Cu-Ni-Fe based materials as inert anode for aluminum production
Light Metals 2009, 1141-1144

Pedneault S., Huot J., Roué L.
Nanostructured Mg2Ni materials prepared by cold rolling and used as negative electrode for Ni-MH batteries
J. Power Sources, 185 (2008) 556-559.

Reyter D., Bélanger D., Roué L.
Elaboration by high-energy ball milling of copper / palladium composite materials. Characterization and electrocatalytic activity for the reduction of nitrate in alkaline medium
J. Electroanal. Chem, 622 (2008) 64-72.

Bouhtiyya S.and Roué L.
On the characteristics of Pd thin films prepared by pulsed laser deposition under different helium pressures
Inter. J. Hydrogen Energy, 33 (2008) 2912-2920.

Reyter D., Belanger D., Roué L.
Study of the electroreduction of nitrate on copper in alkaline medium
Electrochim. Acta 53 (2008) 5977-5984.

Ghodbane O., Sarrazin M., Roué L., Bélanger D.
Electrochemical reduction of nitrate on pyrolytic graphite-supported Cu and Pd-Cu catalysts
J. Electrochem. Soc., 155 (6) (2008) F117-F123.

Ghodbane O., Roué L., Bélanger D.
Study of the electroless deposition of Pd on Cu-modified graphite electrodes by metal exchange reactions
Chem. Mater. 20 (2008) 3495-3504.

Didier-Laurent S., Idrissi H., Roué L.
In-situ study of the cracking of metal hydride electrodes by acoustic emission t technique
J. Power Sources, 179 (2008) 412-416.

Rousselot S., Bichat M-P., Guay D., Roué L.
Structure and electrochemical behaviour of metastable Mg50Ti50 alloy prepared by ball milling
J. Power Sources, 175 (2008) 621-624.

Pednault S., Roué L., Huot J.
Synthesis of metal hydrides by cold rolling
Materials Science Forum 570 (2008) 33-38.

Lestriez B., Bahri S., Sandu I., Roué L., Guyomard D.
On the binding mechanism of CMC in Si negative electrodes for Li-ion batteries
Electrochem. Comm. 9 (2007) 2801-2806.

SanduI., Moreau P., Guyomard D., Brousse T., Roué L.
Synthesis of nanosized Si particles via a mechanochemical solid-liquid reaction and application in Li-ion batteries
SolidStateIonics, 178 (2007) 1297-1303.

Reyter D., Odziembowski M., Bélanger D., Roué L.
Electrochemically activated copper electrodes – Surface characterization, electrochemical behavior and properties for the electroreduction of nitrate
J. Electrochem. Soc., 154/8 (2007), K36-44.

Brylev O., Sarrazin M., Roué L., Bélanger D.
Nitrate and nitrite electrocatalytic reduction on Rh-modified pyrolytic graphite electrodes
Electrochim. Acta, 52 (2007), 6237-6247.

Ghodbane O., Roué L., Bélanger D.
Copper electrodeposition on pyrolytic graphite electrodes: effect of the copper salt on the electrodeposition process
Electrochim. Acta, 52 (2007), 5843-5855.

M. Blouin M., Tremblay M-L., Bercier A., Roué L., Guay D., Schulz R. and Swainson I.P.
Effect of boron on the structural and electrochemical properties of nanocrystalline Ti2RuFeBx electrodes
Electrochim. Acta 52 (2007) 4497-4505

Durivault L., Brylev O., Reyter D., Sarrazin M., Bélanger D., Roué L.
Cu-Ni materials prepared by mechanical milling: their properties and electrocatalytic activity towards nitrate reduction in alkaline medium
J. Alloys Comp., 432 (2007) 323-332.

Reyter D., Chamoulaud G., Bélanger D., Roué L.
Electrocatalytic reduction of nitrate on copper electrodes prepared by high energy ball milling
J. Electroanal. Chem., 596 (2006), 13-24.

Guillet N., Roué L., Marcotte S., Villers D., Dodelet J-P., Chhim N., Trévin S.
Electrogeneration of hydrogen peroxide in acid medium using pyrolyzed cobalt-based catalysts: influence of the cobalt content on the electrode performance
J. Applied Electrochem., 36/8 (2006), 863-870.

Rongeat C., Ruggeri S., Grosjean M-H., Dehmas M., Bourlot S., Roué L.
Evaluation of different approaches for improving the cycle life of Mg-based electrodes for Ni-MH batteries
J. Power Sources., 158/1 (2006), 747-753.

Grosjean M-H., Roué L.
Hydrolysis of Mg-salt and MgH2-salt mixtures prepared by ball milling for hydrogen production
J. Alloys Comp., 416/1-2, (2006) 296-302.

Grosjean M-H., Zidoune M., Huot J-Y., Roué L.
Hydrogen Generation via Alcoholysis Reaction Using Ball-milled Mg-based Materials
Inter. J. Hydrogen Energy, 31 (2006), 1159-1163.

Paillier J., Bouhtiyya S., Ross G. and Roué L.
Influence of the deposition atmosphere on the characteristics of hydriding Pd-Mg thin films prepared by pulsed laser deposition
Thin Solid Films, 500 (2006), 117-123.

Brylev O., Sarrazin M., Bélanger D., Roué L.
Rhodium deposits on pyrolytic graphite substrate: physico-chemical properties and electrocatalytic activity towards nitrate reduction in aqueous solutions
Appl. Catal. B-Environ., 64 (2006), 243-253.

Grosjean M-H., Zidoune M., Roué L., Huot J-Y.
Hydrogen production via hydrolysis reaction from ball-milled Mg-based materials
Inter. J. Hydrogen Energy, Vol 31/1 (2006), 109-119.

R. Schulz, M-E. Bonneau, L. Roué, D. Guay
Alliages à base de Ti, Ru et Al et usage de ceux-ci pour la synthèse du chlorate de sodium
Brevet WO2006/072169.

Chhim N., Trévin S., Aliouane N., Marcotte S., Guillet N., Roué L., Dodelet J-P.
Électrode à diffusion gazeuse, dispositif et procédé de production de peroxyde d’hydrogène
Brevets CA 24987345, EP1568801 et FR2866903. (2005).

Bonneau M. E., Chabanier C., Blouin M., Roué L., Guay D., Schulz R.
Electrochemical in situ X-ray diffraction characterization of hydrogen absorption in nanocrystalline Ti2RuM
Symposium on Electrocatalysis, The Electrochemical Society, Pennington, NJ, Proceedings Volume 2005-11, page 68 – 75

Rongeat C., Roué L.
On the cycle life improvement of amorphous MgNi-based alloy for Ni-MH batteries
J. Alloys Comp., Vol 404-406 (2005), 679-681.

Pailler J., Roué L.
Hydrogen electrosorption and structural properties of nanostructured Pd-Mg thin films elaborated by pulsed laser deposition
J. Alloys Comp., Vol 404-406 (2005), 473-476.

Grosjean M-H., Zidoune M., Roué L.
Hydrogen production from highly corroding Mg-based materials elaborated by ball milling
J. Alloys Comp., Vol 404-406 (2005), 712-715.

Brylev O., Roué L., Bélanger D.
Rhodium electrodeposition on pyrolytic graphite electrode: Analysis of chronoamperometric curves
J. Electroanal. Chem., Vol 581 (2005), 22-30.

Rongeat C., Roué L.
Synergetic effect between Ti and Al on the cycling stability of MgNi-based metal hydride electrodes
J. Electrochem. Soc., Vol 152 (2005) A1354-A1360.

Pailler J., Roué L.
Nanostructured palladium thin films prepared by pulsed laser deposition: structural characterizations and hydrogen electrosorption properties
J. Electrochemical Soc., 152 (2005) E1-E8.